Built in Vehicle Mod Upgrade - ex. with Elite Full Upgrade is equivalent to normal GTA vehicle mod Engine, transmition lvl 4. with extra topspeed, acceleration.
Transmission System - Set Manual Gears or Custom automatic Gears to support Custom Gear Ratios
Commands
this probably good in OX Radial menu.
/tuning - Open Tuning Options if ECU is Installed.
/upgrades - Open Package Installer. (install all in one parts by category ex. Elite)
/repair - Simple Repair System. Single Action in Motorcycle type, and 4 Points Actions in 4 Wheels.
/checkvehicle - See List of Engine parts status, if opened by job ex. mechanic, menu will open a upgrade.
/manualgear - Set your current vehicle to manual gearings (arrow up and arrow down)
/autogear - Set your current vehicle to use custom Automatic Gears. (supports gear ratios and more aggresive compare to vanilla ones.) / autogear 1 if you want to use Ecomode.
/setmileage - set your current vehicle mileage (usage: /setmileage 1000)
/sefuel - set your current vehicle fuel (usage: /setfuel 100) (ox_fuel)
/sethandling - set your current vehicle parts health (usage: /sethandling 50) (max 100)
Tuning FAQ.
based on real life logic. semi realistic
Ignition Timing - if ignition timing is too high, afr will become lean.
Fuel Table - if fuel table is too high, afr will become rich.
Final Drive - can be decrease or increase depending on your usage/track. Increase/Decrease overall topspeed of vehicle.
Gear Ratios - Tune and decide how long or short the gear reach the redline. (this can decrease or increase duration of rpm)
Boost Per Gears - Decide how much Turbo Pressure is allowed to enter in Intake Manifold. ( most usage is Lower boosting in lower gears to reduce Wheelspin) Over Boosting will result a Lean AFR. Lowering the boost might result a Rich AFR.
Engine Efficiency - can be seen in Dyno Tuning. this dictate hows your engine Potencial based on your upgrade and ECU Tuning.
AFR - This shows your current Air and Fuel Ratio. this dictate hows your engine performance, lower afr lower power and too much high AFR decrease power. Average and Recommended AFR value is 13.2 - 13.8 and 13.5 is the perfect tuning (redline)
Engine Temperature - While in Dyno Engine can explode if your engine is too hot due to Lean tuning.
Map Sensor - Dictate how much Air Pressure is going to Intake Manifold. this will increase when using Turbo and NOS.
Turbo Tuning - This Produce a Massive Air Volume to Engine. can result Lean AFR and needs proper Engine Tuning Management.
Stock Vehicle - If vehicle is default with no upgrades (ex. elite) AFR and Tuning Efficiency is always 100.
Upgraded Engine - if vehicle is upgraded (ex. elite) Potencial is always around 80% Engine efficiency and lean AFR, all upgraded parts requires proper Tuning.
Engine Parts Degration FAQ
Stock Engine can degrade very fast if using NOS, Custom Turbo and Over Tuning in ECU.
Upgraded Engine - if engine is fully upgraded (ex. elite, racing) degration is decrease, can still be degraded very fast if BAD tuning and BAD Afr.
Mileage - Engine Degrades when specific mileage is reach.
Engine Parts
Each Engine Parts have specific Handling assign to them (can be configure in config)
Each Engine Parts have specific profiles assign to them (ex. compression, cam duration, fuel and etc.) this profiles increase the value on each variants. this profiles dictate the AFR and tuning efficiency (can be configure in config)
Dependency
ox_lib v3
ox_inventory
(ESX or qbcore)
Inventory Support
right now only ox_inventory/qb-inventory is supported
Inventory porting is easy look for inventory.lua
WIP TASKs
thinking to support qb-menu and standalone notification, callbacks for the sake of people who cant use ox_lib from qbcore.
Supports Oxlib Radial in some commands.
verify if degration is not too slow or too fast.
more inventory support.
Camber Tuning - thinking a more optimise way since CCarhandlingData does not support other logic for Stancer.
Create Simple Job Stash.
other suggestion from community. (please dont suggest any mechanic job logic)
PS: Thank to MIST and his friend the modeler for providing a dynamometer model.<br>
Image Upgrade Menu
This link is hidden for visitors. Please log in or register to view it.
This link is hidden for visitors. Please log in or register to view it.
This link is hidden for visitors. Please log in or register to view it.
This link is hidden for visitors. Please log in or register to view it.
This link is hidden for visitors. Please log in or register to view it.
This link is hidden for visitors. Please log in or register to view it.
This link is hidden for visitors. Please log in or register to view it.
This link is hidden for visitors. Please log in or register to view it.
This link is hidden for visitors. Please log in or register to view it.
This link is hidden for visitors. Please log in or register to view it.
This link is hidden for visitors. Please log in or register to view it.
This link is hidden for visitors. Please log in or register to view it.
You can control a structure that you can use to use your theme wide or narrow.
Grid view forum list
You can control the layout of the forum list in a grid or ordinary listing style structure.
Picture grid mode
You can control the structure where you can open/close images in the grid forum list.
Close sidebar
You can get rid of the crowded view in the forum by closing the sidebar.
Fixed sidebar
You can make it more useful and easier to access by pinning the sidebar.
Close radius
You can use the radius at the corners of the blocks according to your taste by closing/opening it.
Choose the color combination that reflects your taste
Background images
Color gradient backgrounds
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.